Learn how to clean a shower like a pro with these quick and natural cleaning tips that can be used in any bathroom.
The best and easiest way to clean a shower is to follow a good bathroom cleaning routine by wiping it down quickly after each use. However, we don’t always have the time to do this on a daily basis, and it’s quite normal for hard water stains and soap scum to build up over time.
Fortunately, the handy cleaning hacks below will help you tackle these common problems by providing natural solutions that are proven to scrub away the stains in your shower, make your glass shower door sparkle and even show you how to clean grout for a clean and pristine finish. .
How do you clean a shower quickly and effectively?
There are several strategies you can use to quickly and efficiently clean a shower and remove water stains, limescale and mold. We’ve focused below on tried-and-tested natural methods that minimize the use of high-bleach chemical cleaning products.
1. Empty the shower
Start by removing all toiletries and accessories, such as body brushes and sponges, from your shower to create a clear area to clean thoroughly.
Often, bottles of shampoo and body wash, or the soap dish and shower caddies, can fill with soap scum and limescale, turning into an unwanted fungus, fed by daily soaking. These will therefore have to be cleaned separately.
2. Clean the shower tray with vinegar and baking soda
Vinegar and baking soda are a common, natural, DIY cleaning solution, and it’s a good mix to thoroughly clean your shower tray.
Vinegar and baking soda, when combined, produce a chemical reaction that can help scrub the stubborn hard water or other stains on your shower tray. This simple strategy can save you some scrubbing.
Here’s how to clean a shower tray with vinegar and baking soda:
- Sprinkle a generous amount of baking soda to cover the entire surface of the shower tray.
- Spray the container with vinegar. The baking soda will begin to fizz as the reaction begins to work.
- Let it sit for a few minutes and when the vinegar has had a chance to react with the baking soda and the fizzing has stopped, rinse the baking sheet with water and wipe it clean.
- If you have stubborn stains, you can use a bristle brush for extra scrubbing power before rinsing the bowl with water.
3. Use a universal solution to clean surfaces
A general purpose cleaner is best for cleaning all surfaces, making cleaning more efficient because you can use the same solution for everything. Start by spraying all surfaces in the shower with your detergent of choice, many of which are now natural all-purpose cleaners (opens in new tab) to reduce the use of harsh chemicals in your home.
Spray each surface at once to perform a quick but efficient clean, then return to where you started concentrating on smaller areas when you wipe them down with a clean microfiber cloth.
4. Mix vinegar and water to tackle limescale
For a cheap, quick and effective cleaning solution to tackle limescale from washing the faucets or cleaning the shower head, mix vinegar and water. This great basic cleaning solution can help remove limescale and get your shower shining like new in no time.
How to mix it:
- Fill a spray bottle with equal parts vinegar and water. It’s okay if it’s not precise! Then spray your entire shower, especially the areas where limescale builds up.
- Let it sit and work for 5 to 15 minutes
- Rinse the areas with warm water and then wipe them off in the shower, applying more pressure on the areas where the limescale was worst
Professional Cleaning Expert and TVs Queen of Clean Lynsey Crombie (opens in new tab) offers her advice, saying, “If you have very hard water and limescale, cut a lemon in half, cover it with bicarb, and rub it in the shower. Let it sit, then rinse and polish.”
“Take off the shower head and soak it in a bowl of white vinegar to remove limescale and hard water. If the head doesn’t come off, soak a kitchen towel in white vinegar and wrap it around the shower head.” Make sure to rinse off all traces of the vinegar after cleaning.
5. Clean the grout between tiles
To give your shower a sparkling finish, the grout between your tiles may need a little extra attention. Tile and grout can both collect stubborn stains that are difficult to wash off, especially if you let those stains build up.
You can use baking soda to remove those stubborn stains in minutes.
Make a paste to thoroughly clean your grout and use an old toothbrush to apply the paste to the grout to make sure it gets into the holes.
To clean the grout in your shower with baking soda and water:
- Make a paste with a spoonful of baking soda and water. Add the water a small amount at a time to make sure the mixture is thin enough to handle, but thick enough to still have texture.
- Apply to the grungy areas of your shower. If you have a tiled shower that is showing serious signs of hard water staining, you may want to cover the shower!
- Let it sit for 15 minutes.
- Scrub with a bristle brush. In hard-to-reach areas of the grout, it may be easier to reach deep and scrub away the grime with a toothbrush. In larger areas of the shower, you can use a larger brush to achieve your goals.
6. Clean the shower screen door and glass surround
Baking soda paste is also a great way to wipe down dirty, cloudy glass shower doors and glass panels. Cover the shower door with the paste, let it sit for a few minutes, then scrub it off. You might be surprised at how clear that surface can be.
You can also use a store-bought glass cleaner (opens in new tab)or make your own, using Lynsey’s DIY natural solution below.
To clean up the shower door, screens and tiles you will need:
- A splash of detergent
- 20 ml white vinegar
- 5 drops of eucalyptus oil
To use, simply mix the solution together and add it to a spray bottle. Shake well and apply to the screen. Wipe off, rinse with water and polish with a dry microfibre cloth.
7. Wash the shower curtain
Shower curtains can smell like standing water and become a breeding ground for mold around the edges, so don’t forget to clean your shower curtain too, if you have one.
Simply detach the curtain from the hanging hoops and give it a warm wash. “Don’t forget to check the washing instructions on your shower curtain, because you might just run it through the washing machine,” said Heather Nixon, sustainability manager at green cleaning company Bio-D. (opens in new tab)† “If not, soak it in a tub or sink, or wipe it down with an eco all-purpose cleaner.”
8. Tackle stubborn stains with peroxide and cream of tartar
Need some extra cleaning power and a punch to scrub away soap scum and stubborn water stains? Hydrogen peroxide may be just the tool you need. Often, peroxide alone is enough to remove most stains in your shower, including water stains. Just spray the shower down, let it sit for 15-30 minutes and wipe it off.
If you’re having more trouble getting to the root of the problem, consider making a paste with peroxide and tartar. By combining these simple household remedies, you get a paste that helps scrub away those stubborn stains. Apply your peroxide or paste to the difficult area and then leave it on for up to 30 minutes. Finally, use a damp cloth or sponge to scrub away the stains.
How often should you clean a shower?
Just like cleaning the toilet, a shower should be cleaned once a week. But cleaning experts often recommend wiping all surfaces daily after each use to avoid excess product and using a squeegee brush on shower doors to remove watermarks. It is also good practice to rinse the shower tray after each use to ensure all products and hair are rinsed away.
You should also make sure to clean the shower head every week or so as you will experience limescale build-up here.
“Bathrooms can cause breathing difficulties if mold builds up,” warns Heather Nixon, sustainability manager at green cleaning company Bio-D. Advice: “Spray your shower with a bathroom cleaner twice a week and wipe off all grime to keep airborne dust or mold at bay.
In the future, if you want to reduce the time it takes to clean your shower, try this simple tip to make the weekly chore more achievable: Save a shower spray (opens in new tab) or a spray bottle with an equal mix of vinegar and water, or peroxide and water, in the shower. Spray after every shower and then wipe off. This simple step can keep your shower shiny every day!
How do professional cleaners clean showers?
To get a real insight into how professional cleaners clean showers, we asked a leading expert, Chris Wootton, director of the domestic cleaning company, Poppies. (opens in new tab)†
Chris explains how to clean a shower professionally, telling woman&home: “Shower cleaning should be approached with care and it is important to note which chemicals work when cleaning. All-purpose bathroom cleaner should work well for all shower-related cleaning, including shower tiles, the shower head and fixtures – no need to spend too much money.”
“Start by spraying all surfaces at once and then go back to where you started concentrating on smaller areas when wiping them. If you have limescale make sure it is cleaned with an acidic solution as it is alkaline. “
Chris explains, “The best way to deal with limescale is with warm water and a white vinegar solution, and you may need to use the rougher side of a non-scratch scouring pad and some elbow grease.”
“For the shower windows, the all-purpose cleaner should work too, but hard water stains can also be removed and deodorized by using lemons. To clean the drain, pour a quarter cup of baking soda down the drain followed by a quarter pint of white vinegar. Allow the solution to bubble for 10 minutes, then pour boiling hot water down the drain to remove the grease and any remaining grime.
And there you have it, a professional shower clean to keep your bathroom shiny.